مقال علميScience

أكاسيد الحديد أنوداتٍ لبطاريات أيونات الصوديومIron oxides as anodes for sodium-ion batteries

تعتمد هواتفنا وسياراتنا الكهربائية على بطاريات أيونات الليثيوم، لكن الليثيوم نادر نسبياً في القشرة الأرضية ومتركّز في بلدان قليلة. الصوديوم أوفر منه بأكثر من ألف مرة ويُستخرج من ملح الطعام، لذلك تُعدّ بطاريات أيونات الصوديوم بديلاً واعداً للتخزين الكبير والرخيص للطاقة.

مشكلة الأنود

الغرافيت، أنود بطاريات الليثيوم المعتاد، لا يستوعب أيونات الصوديوم الأكبر حجماً بكفاءة في الإلكتروليتات الشائعة. لذلك نبحث عن مواد أخرى، ومن أكثرها جاذبية أكاسيد الحديد: رخيصة، غير سامة، متوفرة، وسعتها النظرية عالية لأنها تتفاعل مع الصوديوم بتفاعل «تحويل» يحمل عدة إلكترونات لكل وحدة صيغة:

Fe₂O₃ + 6 Na⁺ + 6 e⁻ ⇌ 2 Fe + 3 Na₂O   (≈ 1007 mAh g⁻¹)

هذه السعة النظرية أعلى بكثير من سعة الغرافيت في بطاريات الليثيوم (372 mAh g⁻¹).

لماذا تتراجع السعة؟

يرافق تفاعل التحويل تغيّر كبير في الحجم أثناء الشحن والتفريغ، فتتشقق الجسيمات وتفقد تماسها الكهربائي. كما أن أكاسيد الحديد ضعيفة التوصيل الإلكتروني، وتُستهلك كمية من الصوديوم في الدورة الأولى لتكوين طبقة على سطح القطب، فتنخفض الكفاءة الكولومبية الأولى.

دور الكربون والحجم النانوي

تصغير الجسيمات إلى المقياس النانوي يقصّر مسافات انتشار الأيونات ويخفف الإجهاد، وتغليفها بالكربون أو دمجها في شبكة كربونية يحسّن التوصيل ويستوعب تغيّر الحجم ويثبّت سطح القطب. هذا ما أدرسه في الدكتوراه: تحضير أشكال مختلفة من أكاسيد الحديد بالطريقة الحرمائية، وتعديلها بالكربون، ومقارنتها.

كيف نقيس التحسن؟

تخبرنا الفولتامترية الدورية بنوع آلية التخزين (انتشارية أم سعوية) عبر قيمة b، وتكشف مطيافية الممانعة مقاومة نقل الشحنة، ويعطي الشحن والتفريغ السعة والكفاءة والاحتفاظ بالسعة عبر مئات الدورات، وتقدّر تقنية GITT معامل انتشار الصوديوم. وقد أضفنا هذه التحليلات كلها إلى برنامج NanoLab لمقارنة الأقطاب وترتيبها تلقائياً.

Our phones and electric cars run on lithium-ion batteries, but lithium is relatively scarce in the Earth's crust and concentrated in a few countries. Sodium is more than a thousand times more abundant and comes from common salt, which makes sodium-ion batteries a promising option for large, low-cost energy storage.

The anode problem

Graphite, the usual lithium-ion anode, does not host the larger sodium ions efficiently in common electrolytes, so other materials are needed. Iron oxides are among the most attractive: cheap, non-toxic, abundant and with a high theoretical capacity, because they react with sodium through a multi-electron “conversion” reaction:

Fe₂O₃ + 6 Na⁺ + 6 e⁻ ⇌ 2 Fe + 3 Na₂O   (≈ 1007 mAh g⁻¹)

That is far above graphite's capacity in lithium cells (372 mAh g⁻¹).

Why the capacity fades

The conversion reaction comes with a large volume change on every cycle, so particles crack and lose electrical contact. Iron oxides are also poor electronic conductors, and part of the sodium is consumed in the first cycle to build a surface layer on the electrode, lowering the initial coulombic efficiency.

What carbon and nano-size do

Shrinking the particles to the nanoscale shortens ion-diffusion paths and eases the strain; coating them with carbon or embedding them in a carbon network improves conduction, accommodates the volume change and stabilizes the electrode surface. This is the subject of my doctoral work: hydrothermal synthesis of different iron-oxide phases, carbon modification and comparison.

How we measure the improvement

Cyclic voltammetry tells us whether storage is diffusion-controlled or capacitive through the b-value; impedance spectroscopy reveals the charge-transfer resistance; charge–discharge gives capacity, efficiency and retention over hundreds of cycles; and GITT estimates the sodium diffusion coefficient. We added all of these analyses to NanoLab to compare and rank electrodes automatically.